Indmark Gas Compressors

Our professionals are expert in supplying, commissioning and installation of CNG Gas Compressors. These compressors are available in various models and specifications. Clients can avail from us, two type of CNG compressor units the CNG compressor units V16G-4411 L 25 and Assembling of CNG compressor package BS302 - 313 S 25/30 at LMF works.

• LMF CNG Compressor BS302-313 S 25/30: Capacity 1254-2145 Nm3/h (780 to 1335 scfm), suction pressure 11.35 - 18.25 bara, speed 1500 rpm / 315 kW 430 hp) main drive
• LMF CNG Compressor V17G-5518 L25: Capacity 140 - 200 Nm3/h (87 to 125 scfm), suction pressure 1.02 - 1.4 bara speed 1200 rpm, hydraulic motor, MAN gas engine (130 kW / 180 hp) for hydraulic pump and E-generator, housing in the dimension of a 30ft container, high pressure 3 bank storage system

We are instrumental in supplying and commissioning Hydrogen Gas Chambers for various industries. Used in diverse applications, these compressors are offered as:

 

Hydrogen Gas Compressor (1):

• Water-cooled high pressure compressor unit B 182-212 N 16.3
• Two stages, non-lubricated
• Direct drive for compressing hydrogen
• Capacity of 1,700 Nm3/h (1,050 scfm) in the 1st stage, with additional feed of up to 3,700 Nm3/g (2,300 scfm) in the 2nd stage
• Working pressure 163 bar (2,360 psi)

 

Hydrogen Gas Compressor (2):

• Water-cooled high pressure compressor unit B 252-214 S B.7
• Equipped with step less capacity regulation
• One stage, min-lubricated
• Direct driven, for compressing hydrogen,
• Capacity 46,800 Nm3/h (29,220 scfm)
• Working pressure 87 bar (1,260 psi)

Our clients can avail from us a quality range of Nitrogen Gas Compressors that is specifically designed for nitrogen gas. Available in various specifications and models, our range of compressors is appreciated for enhanced performance. These gas compressors are designed to be used in various mega factory units with lots of gas requirement.

 

Clients can avail our compressors in the following range:

 

Nitrogen Gas Compressor (1):

• Water-cooled high pressure compressor unit B 182-212 N 16.3
• Two stages, non-lubricated
• Direct drive, for compressing hydrogen
• Capacity of 1,700 Nm3/h (1,050 scfm) in the 1st stage, with additional feed of up to 3,700 Nm3/g (2,300 scfm) in the 2nd stage
• Working pressure 163 bar (2,360 psi)

 

Nitrogen Gas Compressor (2):

• Water-cooled high pressure compressor unit T 123-325 N 4.6
• Three stages, non-lubricated
• Direct driven, for compressing nitrogen
• Capacity 1,160 Nm3/h (720 scfm)
• Working pressure 46 bar (667 psi)

Our exclusive range of compressors includes specifically designed huge sized Carbon Monoxide Gas Compressors. These compressors work in high pressure situation and deliver maximum amount of compressed carbon monoxide gas. Highest level of quality standards are maintained for the gas compressed, by these machines.

Available in:

Carbon Monoxide Gas Compressor (1):

• Water-cooled compressor packages T183-357 N 1.1
• Three stages, non-lubricated
• Direct driven, for compressing carbon monoxide
• Capacity 3,325 Nm3/h (2,070 SCFM)
• Working pressure 11 bar (160 psi)

 

Carbon Monoxide Gas Compressor (2):

• Water-cooled compressor package B 121-114 S 26
• One stage, min-lubricated
• V-belt driven, for compressing carbon monoxide
• Capacity 16,800 Nm3/h (10,450 SCFM)
• Working pressure 260 bar (3770 psi)

Our organization is engaged in offering various kinds of Compressors, which are specifically designed for various gases. We offer Carbon Dioxide Gas Compressors that work in high pressure conditions and are driven through v-belt. Clients utilize our range for the purpose compressing gas in bulk quantities at mega sized factory units.

 

Carbon Dioxide Gas Compressor (1):

• Water-cooled high pressure compressor unit B152-252 N 7.1
• Two stages, non-lubricated
• V-belt driven, for compressing wet carbon dioxide
• Capacity 765 Nm3/h (475 scfm)
• Working pressure 71 bar (1,030 psi)

 

Carbon Dioxide Gas Compressor (2):

• Water-cooled high pressure compressor unit B 122- 314 N 6.6
• Three stages, non-lubricated
• V-belt driven, for compressing carbon dioxide
• Capacity 3,490 Nm3/h (2,170 scfm)
• Working pressure 66 bar (960 psi)

Ethylene / Propylene(1):
Water cooled compressor package B251-136 N 2.6, equipped with step less capacity regulation, one stage, non-lubricated, direct driven, for compressing propylene gas mixture, capacity 3,042 Nm³/h (1,890 SCFM), working pressure 26 bar (377 psi)

Ethylene / Propylene(2):
Water cooled compressor package B252 - 268 S 2.8, two stages, min-lubricated, direct driven, for compressing ethylene gas mixture, capacity 5,550 Nm³/h (3,450 scfm), working pressure 28 bar (406 psi)

Gas Mixture (1):
Water cooled high pressure compressor unit B 152-107 S 16, one stage, min-lubricated, V-belt driven, for compressing natural gas including H₂S, capacity 10,050 Nm³/h (6,250 SCFM), working pressure 160 bar (2,320 psi)

Gas Mixture (2):
Water cooled compressor package B154-255 S 2.1, two stages, min-lubricated, direct driven, for compressing hydrocarbon gas mixture including H₂S, capacity 9,780 Nm³/h (6,080 SCFM), working pressure 21 barg (305 psig)

Hydrogen Gas Mixture(1):
Water cooled compressor package B 182-123 N 4.3, one stage, non-lubricated, direct driven, for compressing HC gas mixture, capacity 21,200 Nm³/h (13,185 SCFM), working pressure 43 bar (625 psi)


Hydrogen Gas Mixture(2):
Water cooled compressor package B254-360 N 3.3, three stages, non-lubricated, direct driven, for compressing HC gas mixture, capacity 10,900 Nm³/h (6,780 SCFM), working pressure 33 bar (480 psi

Seismik Reasearch (1):

Portable HP compressor unit V16-4411 L 35-K four cylinders, for stages, single-acting, aircooled, delivery 0.9 m³/min (32 cfm), working pressure up to 350 bar (5075 psi)

Seismik Reasearch (2):
Direct electric driven compressor V17-55 18 L 45 five cylinders, five stages, single-acting, aircooled, delivery 2.6 m³/min (92 cfm), working pressure up to 450 bar (6225 psi)

Seismik Reasearch 3):
Portable compressor unit consisting of compressor type V17-55 18 L direct coupled to a watercooled diesel engine, containerized for shallow-water seismic applications

Seismik Reasearch (4):
Bare compressor BT 4-4429 L/ W20 (suitable for direct drive) four cylinders, fourstages, single-acting, aircooled cylinders, watercooled coolers delivery 8.5 m³/min (300 cfm), working pressure up to 150 bar (2175 psi)

Seismik Reasearch (5):

Totally aircooled, containerized compressor unit consisting of compressor type Bt4-4429 direct coupled to an electric motor, suitable for operation on deck

Seismik Reasearch (6):

Totally aircooled, containerized compressor unit consisting of compressor type Bt4-4429 direct coupled to an electric motor, suitable for operation on deck

Seismik Reasearch (7):

Portable compound compressor unit LMF 20/138-150 Ds, containerized (20 container), including HP-airreceivers, HP-air control valve, seawater supply pump and special manifold with 32 HP outlets.