San Air Tools

Clamp on Air / Electric agitator comes with power support of 1/4 HP and air pressure of 0.63Mpa. Having speed of 1500r/min with maximum torque of 3.43 N.m, these also deliver air cons. of 310L/min with paint barrel capacity of 200 L. Featuring axes size of 15x960 mm and vane size of 6"x2, we make these available with net weight of 6.0 kgs. Providing working as low torque & cost effective agitators, these also come equipped with powerful tri-valve air motor support.

Features:

• Comes with power support of 1/4HP and air pressure of 0.63Mpa
• Having speed of 1500r/min with maximum torque of 3.43N.m
• Having air cons. of 310L/min with paint barrel capacity of 200L
• Having axes size of 15x960 mm and vane size of 6"x2
• Comes with net weight of 6.0kgs
• Low torque cost effective agitator
• Coming equipped with powerful tri-valve air motor

Specifications:

Specification given are for Air. All stirrers are sized to application

Closed Drum Stirrer Stand Type is 1/4 HP Air Agitator of clamping type that comes with power of 1/4HP and air pressure of 0.63Mpa. Further, these air agitators have speed of 1500r/min with maximum torque of 3.43N.m and air cons. of 310L/min. Coming with paint barrel support of 200L and with axes size of 15x960 mm, these also feature vane size of 6"x2 which make these deliver efficient performance. Available in net weight of 7.0kgs, we can also customize these as per the specific demands of the customers.

Specifications:

All closed drum stirrer come with Flexible Impeller which open during stirrer. Available for all size of commercially used drums

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments. such as flammable, explosive, high temperature, vibration, humidity and dust.

Easy to operate, maintain and repair. The  San air motor has a simple structure, small size, light weight, and strong power. Using  San air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing.

Drum Stirring of Chemicals / Additives where sedimentation occurs due to specific gravity variation of ingredients is a difficult task. BI make Drum Stirrer is ideal for drum mixing when the contents must be thoroughly mixed before they can be pumped out. The propeller diameter of conventional stirrers are too big to be inserted through a bung opening which forces the user to opt for either manual stirring or cut open the barrel to enable the conventional stirrer to be inserted, which makes it cumbersome and time consuming. Bi make Drum Stirrers, a light, portable and continuous duty rated allows quick blending without removing the drum lid. The Drum Stirrer Assembly incorporates a threaded stainless steel nipple to allow mounting on the opening of drums. Our unique design with foldable propeller with detachable drive motor allows for simple drum stirring.

San Air Electric hand-held air agitator is mainly used in an open container and is so light that it can be moved easily from one container to another.

Using 2 AM stainless steel san air motor, the whole body material is also made of stainless steel, which has the characteristics of corrosion resistance and rust prevention. The surface is smooth and transparent, and it is environmentally friendly and safe to use.

This San Air Electric hand-held air agitator is widely used for blending, dissolution, preparation of pharmaceutical, neutralization, solution mixing, solid suspension, coagulation and other processes, in paint, coatings, fine chemicals and terminal products and other industries have a wide range of applications. Can also widely used in other dangerous places, explosion-proof, stable performance.

All types of agitators support personalized customization, our company have professional technical personnel to provide customized solutions and professional technical support according to your needs.

Air mixers are available conversion systems. The air mixer supplied by us meets the requirements of Different venture size mixers are available for different vehicles and engines. Special type mixers can be developed as per the requirements.

San Air Electric Motor Plate Maounted Drum Stirrer  is mainly used in an open container and is so light that it can be moved easily from one container to another.

Using 2 AM stainless steel san air motor, the whole body material is also made of stainless steel, which has the characteristics of corrosion resistance and rust prevention. The surface is smooth and transparent, and it is environmentally friendly and safe to use.

This San Air Electric hand-held air agitator is widely used for blending, dissolution, preparation of pharmaceutical, neutralization, solution mixing, solid suspension, coagulation and other processes, in paint, coatings, fine chemicals and terminal products and other industries have a wide range of applications. Can also widely used in other dangerous places, explosion-proof, stable performance.

All types of agitators support personalized customization, our company have professional technical personnel to provide customized solutions and professional technical support according to your needs.

 Electric Motor Plate Mounted Drum Stirrrer comprises 5 gallon capacity based air agitators that come with power support of 1/8 HP and air pressure of 0.63 Mpa. Featuring speed of 2500 r/min with maximum torque of 1.07 N.m, these also have air cons. of 310L/min with paint barrel capacity of 20 L. For optimum performance support, these Plate Maounted Drum Stirrer come in axes size of 12x500 mm with vane size of 4". Made available in net weight of 4.5 kgs, these come with special designed stainless steel 316 blades that also provided for easy fitting support.

Pneumatic Hand -Held Stirrer

Pneumatic Hand-Held Stirrer  are available in various speeds. Just control the intake or exhaust valve to adjust the output and speed of the motor.

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments. It can work normally under conditions such as flammable, explosive, high temperature, vibration, humidity and dust.

Easy to operate, maintain and repair. The San  air motor has a simple structure, small size, light weight, and strong power. Using air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing.

ADM130 hand-held Stirrer is mainly used in an open container and is so light that it can be moved easily from one container to another.

Using 2 AM stainless steel  San air motor, the whole body material is also made of stainless steel, which has the characteristics of corrosion resistance and rust prevention. The surface is smooth and transparent, and it is environmentally friendly and safe to use.

We offer to our client s wide range of San Air Pneumatic  Hand-Hold Air Agitator.

Air mixers are available conversion systems. The  San air mixer supplied by us meets the requirements of Different venture size mixers are available for different vehicles and engines. Special type mixers can be developed as per the requirements.

.

Pneumatic Motor

Closed Drum Stirrer is 1/4 HP Air Agitator of clamping type that comes with power of 1/4HP and air pressure of 0.63Mpa. Further, these air agitators have speed of 1500r/min with maximum torque of 3.43N.m and air cons. of 310L/min. Coming with paint barrel support of 200L and with axes size of 15x960 mm, these also feature vane size of 6"x2 which make these deliver efficient performance. Available in net weight of 7.0kgs, we can also customize these as per the specific demands of the customers.

All closed drum stirrer come with Flexible Impeller which open during stirrer. Available for all size of commercially used drums

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments. such as flammable, explosive, high temperature, vibration, humidity and dust.

Easy to operate, maintain and repair. The  San air motor has a simple structure, small size, light weight, and strong power. Using  San air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing.

 San Air This is followed by intense hydraulic shear as the materials are forced, at high velocity, out through the perforations in the stator and circulated into the main body of the mix.

Pneumatic Motor Closed Drum Stirrer is 1/4 HP Air Agitator of clamping type that comes with power of 1/4HP and air pressure of 0.63Mpa. Further, these air agitators have speed of 1500r/min with maximum torque of 3.43N.m and air cons. of 310L/min. Coming with paint barrel support of 200L and with axes size of 15x960 mm, these also feature vane size of 6"x2 which make these deliver efficient performance. Available in net weight of 7.0kgs, we can also customize these as per the specific demands of the customers.

San Air Pneumatic mixers are available in various speeds. Just control the intake valve or exhaust valve to adjust the output power and speed of the San  motor.

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments such as flammable, explosive, high temperature, vibration, humidity and dust.

Easy to operate, maintain and repair. The San air motor has a simple structure, small size, light weight, and strong power. Using San  air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing.

Currently widely used in cosmetics, food, medicine, leather, papermaking, water treatment, etc.

 San Air Pneumatic mixer is lightweight, easy to carry, 100% explosion-proof, suitable for flammable and explosive occasions, can be used in mixing, cosmetics, flavors and fragrances, shoe factories, leather factories, wood products factories, crafts, papermaking, adhesives, tire manufacturing, water treatment and other places.

 San Pneumatic mixers are available in various speeds. Just control the intake valve or exhaust valve to adjust the output power and speed of the San Air motor.

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments. .

Easy to operate, maintain and repair. The San  air motor has a simple structure, small size, light weight, and strong power. Using air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing. Currently widely used in cosmetics, food, medicine, leather, papermaking, water treatment, etc.

San Air Open drum mixer is designed for the economical mixing of small tanks and Portable Clamp Type Stirrer.
The mixer can be easily mounted, and the shaft angle can be easily adjusted for optimum mixing.

Well-suited for mixing/blending low viscosity fluids and suspending or dissolving low concentrations of solids in water or water like liquids, including light oils and syrups.

Pneumatic mixers are available in various speeds. Just control the intake valve or exhaust valve to adjust the output power and speed of the motor

Easy to operate, maintain and repair. The San air motor has a simple structure, small size, light weight, and strong power. Using air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing

The Heavy Duty Clamp mount mixers are the work horses of Mixer Direct’s portable mixer line. With heat treated aluminum housings you get both outstanding durability and lightweight portability.

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments flammable, explosive, high temperature, vibration, humidity and dust.

MANUAL TELESCOPIC STAND TYPE STIRRER

 San Air Pneumatic mixers are available in various speeds. Just control the intake valve or exhaust valve to adjust the output power and speed of the  San motor.

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments. as flammable, explosive, high temperature, vibration, humidity and dust.

Easy to operate, maintain and repair. The San air motor has a simple structure, small size, light weight, and strong power. Using air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing. Currently widely used in cosmetics, food, medicine, leather, papermaking, water treatment, etc

San Air Pneumatic Open drum mixer is designed for the economical mixing of small tanks and open head drums.

The mixer can be easily mounted, and the shaft angle can be easily adjusted for optimum mixing.

Well-suited for mixing/blending low viscosity fluids and suspending or dissolving low concentrations of solids in water or water like liquids, including light oils and syrups.

Pneumatic mixers are available in various speeds. Just control the intake valve or exhaust valve to adjust the output power and speed of the San  motor.

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments. It can work normally under harsh conditions such as flammable, explosive, high temperature, vibration, humidity and dust.

Easy to operate, maintain and repair. The  San air motor has a simple structure, small size, light weight, and strong power. Using air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing. Currently widely used in cosmetics, food, medicine, leather, papermaking, water treatment, etc.

Electric Motor  Pneumatic Cylinder Lift Type Stirrer
Working pressure: 0.1~0.6Mpa.

 Pneumatic Cylinder Lift Type Stirring capacity: 20-100l barrels of paint, ink, glue and other chemical liquid aterials are stirred, mixed and dispersed.

 San Air Pneumatic lifting freely adjusts the height, improves the efficiency of mixing work, and reduces labor intensity.

Standard lifting height: 750mm off the ground after lifting (can be customized according to customer's barrel requirements)

 San Air Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.

The maintenance and inspection of the mixer has a great influence on the service life and performance. In order to fully exert the performance, clean and dry compressed air must be used. The rust and moisture in the piping in the air compressor must be filtered and removed before use. Install filters or better triplets. Please use it under the air pressure range of 5-8kg/cm2. If the high pressure exceeds this pressure range, it will cause malfunction. If the pressure is insufficient, the performance will not be able to be exerted. In order to maintain stable performance, it must be supplied pneumatically. Tool oil, insufficient oil supply will cause the tool to heat up, causing wear, insufficient power, performance degradation, etc., greatly affecting tool life.

Electric Motor  Pneumatic Cylinder Lift Type Stirrer features all contact parts made of SS 316 metal. Having  San air based operation support, the system can be made available with speed control as well as digital RPM indicator. Further, Motor  Pneumatic Cylinder Lift Type Stirrer we can offer it in different models depending upon scope of applications as well as parameters like batch size and volume to be homogenized. With option of also making it available with support of Chuck that provides easy shaft interchangeability, these high pressure homogenizing systems are suitable for use in industry sectors like Chemical, Cosmetic, Pharmaceutical, Biotech, Food industries and others.

Keeping the diverse requirements of customers in mind, our company offers excellent quality array of Pneumatic Agitator. This Pneumatic Cylinder Lift Type Stirrer Agitator is designed by the team of skilled professionals by using advance machines. Our product range is highly appreciated amongst customers for its rugged construction and optimum finish. The ranges of Pneumatic Agitator are designed to give an excellent performance to the user. We assure that our clients remain satisfied from our qualitative product range.

• Available in SS 316 / 304 Construction
• Maximum Mixing Capacity 500 Ltrs
• Dimension -- 247 x 407 x 303 mm (W x D x H)

Additional Information:

• Item Code: SIDM-A

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 2 - 3 weeks

PNEUMATIC LIFT TYPE STIRRER

 San Air Pneumatic Open drum mixer is designed for the economical mixing of small tanks and open head drums.

The mixer can be easily mounted, and the shaft angle can be easily adjusted for optimum mixing.

Well-suited for mixing/blending low viscosity fluids and suspending or dissolving low concentrations of solids in water or water like liquids, including light oils and syrups.

Pneumatic mixers are available in various speeds. Just control the intake valve or exhaust valve to adjust the output power and speed of the San  motor.

The working environment is not affected by vibration, high temperature, electromagnetic and radiation. Suitable for harsh working environments. flammable, explosive, high temperature, vibration, humidity and dust.

Easy to operate, maintain and repair. The  San air motor has a simple structure, small size, light weight, and strong power. Using air as the medium, the operation is simple and the maintenance is convenient. Stable operation and even mixing. Currently widely used in cosmetics, food, medicine, leather, papermaking, water treatment, etc.

Pneumatic Lift Type Stirrer features all contact parts made of SS 316 metal. Having air based operation support, the system can be made available with speed control as well as digital RPM indicator. Further, we can offer it in different models depending upon scope of applications as well as parameters like batch size and volume to be homogenized. With option of also making it available with support of Chuck that provides easy shaft interchangeability, these high pressure homogenizing systems are suitable for use in industry sectors like Chemical, Cosmetic, Pharmaceutical, Biotech, Food industries and others.

Pneumatic Lift Type Stirrer Our drum mixer stands perfectly complement our clamp-on mixers and rod mount stirrers for hands-off operation. Even smaller mixers work well clamped onto our optimized industrial mixer stand mounts, allowing the mixer to go in and out of your tank or drum with a flip of a switch or turn of a crank. Choose whether you would like your industrial mixer stands mounted to the floor or a portable mixer stand, then select the power source for the lift: air, electric, winch, or manual. Please view our selection of heavy-duty mixer lift stands, and portable mixer stands below.

 San Air Pneumatic Motor Applicable to 20- 50l barrels of paint, ink, cosmetics and other chemical liquid materials mixing, mixing and dispersion.Pneumatic lifting freely adjusts the height, improves the efficiency of mixing work, and reduces labor intensity.Standard lifting height: After the lifting, the impeller is 500mm away from the ground (can be customized according to customer's barrel requirements).

 San Air Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.

The maintenance and inspection of the mixer has a great influence on the service life and performance. In order to fully exert the performance, clean and dry compressed  San air must be used. The rust and moisture in the piping in the air compressor must be filtered and removed before use. Install filters or better triplets. Please use it under the air pressure range of 5-8kg/cm2. If the high pressure exceeds this pressure range, it will cause malfunction. If the pressure is insufficient, the performance will not be able to be exerted. In order to maintain stable performance, it must be supplied pneumatically. Tool oil, insufficient oil supply will cause the tool to heat up, causing wear, insufficient power, performance degradation, etc., greatly affecting tool life.

1. Pneumatic mixer can be steplessly regulated.

2. Pneumatic mixer can reverse in the forward direction.

3.The working environment of pneumatic mixer is not affected by vibration, high temperature, electromagnetic, radiation, etc.

4.Pneumatic motor matched with pneumatic mixer has overload protection function and will not malfunction due to overload.

5.Pneumatic mixer has a high starting torque and can be started directly with load. Start and stop are fast, and can be started with load. It will not affect the use of overloaded burning machines like electric mixers.

6. Pneumatic mixer is easy to operate and maintain.

Electrical Operated Carboy Stirrer finds suitability for all types of Plastic & Metal Can / Carboy. Coming with electrical operated motor option which make these suitable for various applications, the use of these stirrers do not require process of cutting open of the cans as these can be directly mounted on to can mouth opening. With all contact parts made in SS 316 metal finish, we make these stirrers available for 30 / 50 / 100 Ltr carboys/containers.

Features:

• Finds suitability for all types of Plastic & Metal Can / Carboy
• Comes with electrical operated motor option which make these suitable for various applications
• No requirement of cutting open of the cans
• Can be directly mounted on to can mouth opening

• Stirrers available for 30 / 50 / 100 Ltr carboys/containers
• All contact parts made in SS 316 metal finish
• mixing in capacity of 500-600  Ltrs

Air Operated Carboy Stirrer is suitable for all types of Plastic & Metal Can/Carboy. Coming with air operated motor support for suiting different applications, its use requires no need to cut open can as these can be mounted directly on to can mouth opening. With these stirrers available for 30 / 50 / 100 Ltr carboys/containers, for stable performance, all contact parts are made in SS 316 finish that provides for optimum low-speed mixing of high volumes of media and buffer solution.

Features:

• Suitable for all types of Plastic & Metal Can / Carboy
• Air operated motor support for suiting different applications
• No need to cut open can
• Mounts directly on to can mouth opening
• Stirrers available for 30 / 50 / 100 Ltr carboys/containers
• For low-speed mixing of high volumes of media and buffer solution
• Electrical operated motor support for suiting different applications

Specifications:

• Power input : 800 wblade diameter: 160 mm
• No load speed (RPM): 550
• Net weight: 3.5 kg
• All contact parts made in SS 316 finish

Electrical Operated Container Stirrer is available in SS 316 / 304 construction finish and allows for maximum mixing in capacity of 500 Ltrs. The system can be made available with different blade types according to process requirements and comes with powder coated base as well as chrome plated vertical stand support. Coming with support of flameproof motors that make these suitable for hazardous applications, the system also comes with provision for regulation of motor speed through VFD (Variable Frequency Drive).

Features:

• Can be made available with different blade types according to process requirements
• Coming with powder coated base as well as chrome plated vertical stand support
• Flameproof motors that make these suitable for hazardous applications
• Allows for regulation of motor speed through VFD (Variable Frequency Drive)

• Available in SS 316 / 304 construction finish
• Allows for maximum mixing in capacity of 500 Ltrs
• Power: 1/8HP
• Air Pressure: 0.63Mpa
• Speed: 2500r/min
• Max. Torque: 1.07N.m
• Air Cons.: 180L/min

The  San Air electric winch is mainly composed of an explosion-proof motor, a gearbox device, a manual brake device, a winch frame and an  San electric control system.

The  San Air electric winch is driven by an ordinary motor or a variable frequency San motor, and the torque is amplified by the reducer to provide the reel. The reel is wound with a steel wire rope or a special cable to achieve the purpose of traction or heavy lifting

1. Working voltage: 380V/50Hz

2. Rated load: 20kN

3. Working speed: double speed 4m/min???6m/min

4. Control mode: wired remote button box control

5. Winch certificate: CCS classification society certificate

Explosion-proof certificate Exd???BT4Gb

6. Protection level: IP56

7. Motor power: 3kW/2.2kW

8. Full load working time: 20000h

9. Reel diameter: 806mm

10. Drum flange diameter: 1050mm

11. Roll width (between baffles): 371mm

12. Applicable cable diameter: 35mm

13. Cable capacity: 50m

14. Dimensions (length × width × height): 1833mm × 1066mm × 1570mm

15. Mass: 1500kg

1. Adopt two-speed explosion-proof brake San Air motor as drive, and realize torque amplification through deceleration mechanism to drive

The reel rotates and runs with a load of 20kN.

2. The reel is a spiral groove structure, which effectively avoids cable skipping and disorderly arrangement during the process of cable retracting and unwinding.

3. The winch is operated by a wired remote button box, which is convenient for the operator to observe the retracting and unloading of the winch in multiple directions

The situation in the process.

4. The winch has two retraction/retraction modes: high-speed and low-speed.

Low-speed switch knob to achieve, when switching to one of the modes, operate the remote button box to realize

The high and low speed of the current winch is retracted.

5. Electrical system: The electrical box has explosion-proof grade Exd???BT4Gb, 316L material;

The remote button box has explosion-proof grade Exd???BT6Gb

6. With emergency stop function.

7. This product is suitable for offshore oil and gas drilling platforms.

Pneumatic stirrers are widely used in Print and Packaging, Pharmaceuticals, Food and Chemical industries for its unique design of compact size, variable speed, reversibility, silent operation, non hazardous, lubrication free and many more.

These product is supplied with Electric motor. Line pull - 100 kg to 30000 kg Line speed - 1 m/min. To 50 m/min. Rope diameter - 5mm to 40mm drum diameter - 100 mm to 600mm Electric Winches is a Lifting device consisting of a horizontal cylinder turned by a crank on a which a cable or rope winds. Electric Winch is specially designed for application where space is at a premium, these concept and lightweight lifting winches are ideally suited for installation on cranes, davits and derricks. The single drum support enable the rope to leave the drum at a any angle. The heavy-duty planetary drive is partly located within and protected by the drum core. The large drum diameters ensure a healthy drum to cable to diameter ratio and a sufficient working length despite the short drums. We offer to our clients wide range of electric winches to choose from. They work on heat-treated sintered-iron gears for smoother operation. We are leading manufacturers, suppliers and exporters of winch machine with multiple options which include power winch machine, electric operated winch machine, portable electric winch machine, motorized electric winch machine, heavy duty electric winch machine, double drum electric winch machine, electric wire rope winch machine and pulling electric winch machine.