San Air Tools

• Material of Construction in SS 316
• Maximum flow rate 40 Kgs / Minute
• Max discharge pressure up to 6 Bar
• Generates differential head up to 60 Mtrs for thin bodied liquids
• The flow rate is approximately proportioned to speed
• Pumping pressure does not depend upon the speed
• ROTORS are made of Stainless Steel 316 material
• STATORS are metal tubes with internally moulded synthetic rubber & available in Viton, Hypalon, Hi Nitrile, EPDM,Buna –N.

Motorised Barrel Pumps are used for Pumping liquids from Barrels to reactors, carboys, drums and other vessels. Motorised Barrel pumps feature 3 types of motors. Used with Electric, Air and battery operated electric motors. Barrel pump tubes are available in different configurations.

Barrel Pump tube materials

1. Aluminium
2. SS316L
3. Polypropelene (PP)
4. SS316L Electropolished (Sanitary)
5. PVDF

Different Barrel Pump tubes are used for different liquids. For example Barrel Pump Tube constructed in

1. Barrel Pump tube: Aluminium, is suitable for engine oils, lubricant oils, Hydraulic Oils, Diesel, and non reactive liquids.
2. Barrel Pump tube: SS316L. Stainless steel is suitable for reactive chemicals, food supplements, solvents for chemical industries, low concentration acids (less than 30%)
3. Barrel Pump tube: Polypropelene is used for acids and  toxic chemicals that react with Stainless Steel.
4. Barrel Pump tube: SS316L Electropolished (Sanitary) is used for Pharma and sanitary applications for majorly solvent transfer application. Solvents include IPA, Acetone, Methanol, Ethanol, Methylene dichloride, etc.
5. Barrel Pump tube: PVDF is used in Food grade applications.

Electric motors have a lower operating cost as compared to Air motors and majority of applications can be satisfied with Electric Operated Barrel Pumps. Air operated motors have the advantage of use in Flammable environments. Air operated motors are light in weight and can work continuously without heating up. Ideal for solvents and pharma applications. Air motors are available in both Stainless Steel and Mild Steel construction. Electric motors when tun continuously can heat up and have to be stopped every 5 to 10 mins with a 5 minute break to prevent motor burnout.

Barrel Pumps features a lean construction with a Polypropylene moulded impeller that rotates at speeds from 12000 to 16000 rpm. With Oil seals available in Viton and EPDM they are resistant to most solvents and solutions. Centrifugal impellers based barrel pumps are used in pumping of low viscosity solutions less than 700 cps. Heads achieved can vary from 5 meters to 10 meters.

Flow rates can vary from 60 lpm t0 100 lpm at ground level. As the head increases the flow rate will drop. For flow rate beyond 100 lpm diaphragm pumps are recommended.

Metallic Drum Pump is high performance based metallic drum pump which is also known as barrel pump. Made available in stainless steel/chrome plated finish design, the precision functioning of drum pump allows efficient emptying of drum to residue of 1 liter. Here, our expertise lies in offering these in self-priming and self-draining options. With these pumps not requiring any welding support in any part of pump tubes, these can be completely stripped down using least tooling support required in the process.

Features:

• High performance based metallic drum pump which are also known as barrel pumps
• Made available in stainless steel/chrome plated finish design
• Precision functioning of drum pump allows efficient emptying of drum to residue of 1 liter
• Can be made available in self-priming and self-draining options
• Do not require any welding support in any part of pump tubes
• Allows for complete strip down using least tooling support required in the process
• Available in SS 316/MS Chrome Plated finish for suiting any drum/container requirements
• Having standard inlet size in 44 mm & outlet size of 20 mm
• Perfectly meeting the use of 1" flexible hose
• Can be made available in standard tube length of 39"
• Also offered in customized finish lengths of up to 60"
• Also offered in flame proof drum pump/barrel pump finish

• 1050 Watts / Single Phase FHP Type / FC Motor
• Intermittent Duty Rated. Plastic Body.
• Three wire cord and plug.
• In Built ON- OFF Switch.
• Max Flow Rate : 110 LPM
• Max Head in Feet : 45 Feet.
• Weight : 2 Kgs
• Mounting : Vertical

Motorised Barrel Pumps are used for Pumping liquids from Barrels to reactors, carboys, drums and other vessels. Motorised Barrel pumps feature 3 types of motors. Used with Electric, Air and battery operated electric motors. Barrel pump tubes are available in different configurations.

Barrel Pump tube materials

1. Aluminium
2. SS316L
3. Polypropelene (PP)
4. SS316L Electropolished (Sanitary)
5. PVDF

Different Barrel Pump tubes are used for different liquids. For example Barrel Pump Tube constructed in

1. Barrel Pump tube: Aluminium, is suitable for engine oils, lubricant oils, Hydraulic Oils, Diesel, and non reactive liquids.
2. Barrel Pump tube: SS316L. Stainless steel is suitable for reactive chemicals, food supplements, solvents for chemical industries, low concentration acids (less than 30%)
3. Barrel Pump tube: Polypropelene is used for acids and  toxic chemicals that react with Stainless Steel.
4. Barrel Pump tube: SS316L Electropolished (Sanitary) is used for Pharma and sanitary applications for majorly solvent transfer application. Solvents include IPA, Acetone, Methanol, Ethanol, Methylene dichloride, etc.
5. Barrel Pump tube: PVDF is used in Food grade applications.

Electric motors have a lower operating cost as compared to Air motors and majority of applications can be satisfied with Electric Operated Barrel Pumps. Air operated motors have the advantage of use in Flammable environments. Air operated motors are light in weight and can work continuously without heating up. Ideal for solvents and pharma applications. Air motors are available in both Stainless Steel and Mild Steel construction. Electric motors when tun continuously can heat up and have to be stopped every 5 to 10 mins with a 5 minute break to prevent motor burnout.

Barrel Pumps features a lean construction with a Polypropylene moulded impeller that rotates at speeds from 12000 to 16000 rpm. With Oil seals available in Viton and EPDM they are resistant to most solvents and solutions. Centrifugal impellers based barrel pumps are used in pumping of low viscosity solutions less than 700 cps. Heads achieved can vary from 5 meters to 10 meters.

Flow rates can vary from 60 lpm t0 100 lpm at ground level. As the head increases the flow rate will drop. For flow rate beyond 100 lpm diaphragm pumps are recommended.

Motorised Barrel Pumps are used for Pumping liquids from Barrels to reactors, carboys, drums and other vessels. Motorised Barrel pumps feature 3 types of motors. Used with Electric, Air and battery operated electric motors. Barrel pump tubes are available in different configurations.

Barrel Pump tube materials

1. Aluminium
2. SS316L
3. Polypropelene (PP)
4. SS316L Electropolished (Sanitary)
5. PVDF

Different Barrel Pump tubes are used for different liquids. For example Barrel Pump Tube constructed in

1. Barrel Pump tube: Aluminium, is suitable for engine oils, lubricant oils, Hydraulic Oils, Diesel, and non reactive liquids.
2. Barrel Pump tube: SS316L. Stainless steel is suitable for reactive chemicals, food supplements, solvents for chemical industries, low concentration acids (less than 30%)
3. Barrel Pump tube: Polypropelene is used for acids and  toxic chemicals that react with Stainless Steel.
4. Barrel Pump tube: SS316L Electropolished (Sanitary) is used for Pharma and sanitary applications for majorly solvent transfer application. Solvents include IPA, Acetone, Methanol, Ethanol, Methylene dichloride, etc.
5. Barrel Pump tube: PVDF is used in Food grade applications.

Electric motors have a lower operating cost as compared to Air motors and majority of applications can be satisfied with Electric Operated Barrel Pumps. Air operated motors have the advantage of use in Flammable environments. Air operated motors are light in weight and can work continuously without heating up. Ideal for solvents and pharma applications. Air motors are available in both Stainless Steel and Mild Steel construction. Electric motors when tun continuously can heat up and have to be stopped every 5 to 10 mins with a 5 minute break to prevent motor burnout.

Barrel Pumps features a lean construction with a Polypropylene moulded impeller that rotates at speeds from 12000 to 16000 rpm. With Oil seals available in Viton and EPDM they are resistant to most solvents and solutions. Centrifugal impellers based barrel pumps are used in pumping of low viscosity solutions less than 700 cps. Heads achieved can vary from 5 meters to 10 meters.

Flow rates can vary from 60 lpm t0 100 lpm at ground level. As the head increases the flow rate will drop. For flow rate beyond 100 lpm diaphragm pumps are recommended.

Motorised Barrel Pumps are used for Pumping liquids from Barrels to reactors, carboys, drums and other vessels. Motorised Barrel pumps feature 3 types of motors. Used with Electric, Air and battery operated electric motors. Barrel pump tubes are available in different configurations.

Barrel Pump tube materials

1. Aluminium
2. SS316L
3. Polypropelene (PP)
4. SS316L Electropolished (Sanitary)
5. PVDF

Different Barrel Pump tubes are used for different liquids. For example Barrel Pump Tube constructed in

1. Barrel Pump tube: Aluminium, is suitable for engine oils, lubricant oils, Hydraulic Oils, Diesel, and non reactive liquids.
2. Barrel Pump tube: SS316L. Stainless steel is suitable for reactive chemicals, food supplements, solvents for chemical industries, low concentration acids (less than 30%)
3. Barrel Pump tube: Polypropelene is used for acids and  toxic chemicals that react with Stainless Steel.
4. Barrel Pump tube: SS316L Electropolished (Sanitary) is used for Pharma and sanitary applications for majorly solvent transfer application. Solvents include IPA, Acetone, Methanol, Ethanol, Methylene dichloride, etc.
5. Barrel Pump tube: PVDF is used in Food grade applications.

Electric motors have a lower operating cost as compared to Air motors and majority of applications can be satisfied with Electric Operated Barrel Pumps. Air operated motors have the advantage of use in Flammable environments. Air operated motors are light in weight and can work continuously without heating up. Ideal for solvents and pharma applications. Air motors are available in both Stainless Steel and Mild Steel construction. Electric motors when tun continuously can heat up and have to be stopped every 5 to 10 mins with a 5 minute break to prevent motor burnout.

Barrel Pumps features a lean construction with a Polypropylene moulded impeller that rotates at speeds from 12000 to 16000 rpm. With Oil seals available in Viton and EPDM they are resistant to most solvents and solutions. Centrifugal impellers based barrel pumps are used in pumping of low viscosity solutions less than 700 cps. Heads achieved can vary from 5 meters to 10 meters.

Flow rates can vary from 60 lpm t0 100 lpm at ground level. As the head increases the flow rate will drop. For flow rate beyond 100 lpm diaphragm pumps are recommended.