San Air Tools

External Piston type Vibrators as the name suggest uses a piston to produce vibrations of a certain amplitude. These are particularly suitable for conveying, compacting and detach­ing of bulk solids due to perfectly linear vibrations. They reach optimum results in emptying of bins or as drives for vibrating conveyors or feeders.

Working principle:

Pneumatic Piston Air Vibrators are essentially piston oscillators. The piston is made to oscillate to and fro by a positive feedback signal. The oscillations are generated by impact vibrations. The oscillations of the piston are cushioned at one end and free at the other, malleting continuously. The high frequency of the malleting motion produces vibrations.
Piston Air vibrators have been developed for applications requiring "Linear pulsating Force".

They can be used for promoting material flow from small hoppers, down feed pipes and chutes and as prime over for screen, Feeders, compaction and testing table etc.

Specifications;-

• Material: Aluminium
• Force: 190 N to 2.039 N
• Temperature: 5 to 60°C 
• Standard operation up to 200° C (390° F)

Additional Information:

• Item Code: PV-35

Pneumatic Piston Vibrators - Products effectively promote material flow by eliminating the formation of bridges and rat holes in storge containers.Also called pneumatic Piston Vibrators, there are models and options to fit containers of all shapes and sizes including: Bins, hoppers, and silos and also pipes. Ideal for both flat walled hoppers and conical hopper, the Products BH Air vibrators supplied are low maintenance and economical to operate compared to other types of shaker devices. pneumatic Piston Vibrators are sized for the application and their area of influence is determined.

Features:

• High performance
• Reasonable rate
• Highly reliable

Specifications:

• Liner vibration
• Centrifugal force from 18 N to 860 N.
• Available in ATEX compliant or in stainless steel
• Centrifugal force from 11 N to 7.400 N
• Ex II 2 G D 850 C (T6) available (ATEX)
• NTS 50/04 and NTS 50 / 08
• The noise level is below 80 dB(A).
• Nominal frequency from 840 min-1 to 5.900 min-1
• Centrifugal force from 296 N to 31.400 N

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Usually Ex stock or 3 weeks

Quiet Pneumatic Piston Vibrators feature reduced noise while still offering powerful linear force. They are ideal in areas where noise is a concern. Ideal for pharmaceutical applications and are ideal in many applications including dust collectors and batching equipment.. There are available in teflon coating for lubrication free versions.

They are available in impacting and non-impacting models.

Impacting Piston Vibrators provide powerful linear force to keep material flowing from bins, hoppers, chutes, pipes, and trucks.

Specifications;-

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Usually Ex stock

The performance of Air Vibrator and other vibratory equipment has reckoned us as trusted manufacturers, suppliers, and exporters of a wide array of industrial equipments. The Pneumatic Vibrators are used to aid flow of materials from chutes and hoppers. These are also used for compacting of material in moulds and containers or separation of different sizes of materials on screens. Vibrating frequency can be controlled by manipulating air flow to suit process requirements. These can be used in dusty and wet environments and are available at reasonable rates.

Features:

• Dust and water proof construction
• Impeccable performance
• Low energy consumption

The Cleveland Vibrator Co. VMSAC line of pneumatic industrial vibrators features air cushioning of the piston to prevent metal-to-metal contact and reduce noise.

DURABLE - one-piece, ductile iron housing and spring-less design ensure long effective life

SAFE - air cushion prevention of metal-to-metal impact and exhaust muffler reduce noise levels while pneumatic power allows for operation in hazardous areas

VERSATILE - wide range of vibration intensities and dual diameter piston allow for mounting at any angle on your bins, chutes and hoppers handling material loads from 200 lbs to 100+ tons

EASY - all industrial vibrators come with mounting fasteners and a gasket for quick set-up

The Cleveland Vibrator Co. VMRAC-EP line of pneumatic industrial piston vibrators feature threaded, extended pistons for attaching directly to a medium you want to shake, or adding a bumper for padded direct impact.  Common uses include bumping pans or molds to loosen or remove sticky product or impact plates on bins, hoppers or alignment tracks.

DURABLE - one-piece, ductile iron housing and spring-less design ensure long effective life

SAFE - air cushion prevention of metal-to-metal piston impact and exhaust muffler reduce noise levels while pneumatic power allows for operation in hazardous areas

VERSATILE - dual diameter piston allows for mounting at any angle

EASY - all industrial vibrators come with mounting fasteners and a gasket for quick set-up.

The Cleveland Vibrator Co. VMSAC line of pneumatic industrial vibrators features air cushioning of the piston to prevent metal-to-metal contact and reduce noise. The pneumatic vibrator is a flexible piece of system this is critical to many industries. In creation for example, the pneumatic vibrator is used to cast off extra moisture and wallet of air from freshly poured concrete making sure that the cease end result is uniform, appealing and above all, safe.

DURABLE - one-piece, ductile iron housing and spring-less design ensure long effective life

SAFE - air cushion prevention of metal-to-metal impact and exhaust muffler reduce noise levels while pneumatic power allows for operation in hazardous areas

VERSATILE - wide range of vibration intensities and dual diameter piston allow for mounting at any angle on your bins, chutes and hoppers handling material loads from 200 lbs to 100+ tons

EASY - all industrial vibrators come with mounting fasteners and a gasket for quick set-up

The Cleveland Vibrator Co. VMR line of pneumatic industrial piston vibrators features metal-to-metal impact for maximum force output.

DURABLE - one-piece, ductile iron housing and spring-less design ensure long effective life

SAFE - use of exhaust muffler reduces noise levels while compressed air power allows for operation in hazardous areas

VERSATILE - dual diameter piston allow for mounting at any angle on your bins, chutes and hoppers handling

EASY - all industrial vibrators come with mounting fasteners and a gasket for quick set-up

The Cleveland Vibrator Co. VMS line of pneumatic industrial vibrators features air metal-to-metal piston impact for maximum force output.

 one-piece, ductile iron housing and spring-less design ensure long effective life

use of exhaust muffler reduces noise levels while compressed air power allows for operation in hazardous areas
 wide range of vibration intensities and dual diameter piston allow for mounting at any angle on your bins, chutes and hoppers handling material loads from 200 lbs to 100+ tons

 all industrial vibrators come with mounting fasteners and a gasket for quick set-up

Make It a Kit - includes a mounting channel, 5 ft. hose w/ fittings, hand valve, lubrication control, vibralube and safety cable

 

The single impact pneumatic vibrator or "air knocker" delivers one impact at a maximum frequency of once every three seconds through a five-port spool valve. A timer is used to vary the impact cycle required. Single impactors or "air knockers" act most like a hammer and are most effective for sticky materials because they are less likely than continuous vibration to cause packing in bins and hoppers.

DURABLE - one-piece, ductile iron housing and spring-less design ensure long effective life

SAFE - use of ported exhaust reduces noise levels while pneumatic power allows for operation in hazardous areas

VERSATILE - dual diameter piston allow for mounting at any angle on your bins, chutes and hoppers handling

EASY - all industrial vibrators come with mounting fasteners and a gasket for quick set-up

The Cleveland Vibrator Co. SAM & ACM line of pneumatic piston vibrator feature reduced noise levels from SA-EP as a quieter yet powerful alternative for match plates, shell core machines and small bins, hoppers and chutes.

DURABLE - steel housing and exhaust port protection ensure a long life of continuous duty

SAFE - air cushioning and muffler provide reduced noise levels and pneumatic power allows for operation in hazardous areas

VERSATILE - spring activation of the piston allows for mounting at any angle on a variety of mediums

EASY - all industrial vibrators come with mounting fasteners for quick set-up

Model PMA is specifically designed for dislodging dust collected in an Electrostatic Precipitator.  The tapered mount design conforms to most shaft and adapter designs currently in use, while our piston and bore design produce higher frequency and force, using less air than competitive units.

Cleveland Vibrator's Pneumatic Pipe Bracket Assembly provides a vibratory solution for material flow issues in stubborn areas of industrial chutes or pipes. The mounting assembly does not require any welding for installation, giving you the ability to move the pipe brackets freely to meet any material flow challenges within your pipe or chute. We go the extra mile to provide quality pneumatic vibrators by protecting the piston, ball or impeller inside by fitting every unit with exhaust port protection.

Manufacturers across North America rely on our Pneumatic Pipe Bracket Assemblies because our products are:
DURABLE - designed and constructed with hardened pistons and hand-finished bores for continuous duty, maximum life and efficient air consumption; all units come fitted with exhaust port protection  
SAFE - options provided to reduce noise levels while compressed air power allows for operation in hazardous areas
VERSATILE - wide range of vibration intensities and design types allow for flexibility in force outputs, material loads and applications. Welding is not required for pipe bracket assemblies giving maximum adjustability to keep material flowing in pipe & chutes
EASY - all vibrators come with Grade 5 mounting fasteners for quick and easy set-up 

Precipitator Vibrators provide an efficient method of removing particle buildup in Electrostatic Precipitators (ESP's). Internal Teflon coating does not require lubrication.

Specifications:

• Air lube and air lube models available
• Operating pressure: 25 - 45 psi
• Weight: 43lbs
• Average consumption: 1 - 2 scfm

Additional Information:

• Item Code: RAPP-IT

Note : operating pressure 6 kg/cm2

These Pneumatic Air Vibrators have been designed for application that require small to medium amount of vibrations in laboratory equipment, small hoppers, component feeders, powder filling equipment etc. The exhaust can be piped away if required.

Salient Features of these Air Pneumatic Vibrators:

• Simple Construction
• Muffled Exhaust
• Low Weight
• Variable Frequency
• Dual mount Provision
• Easy to maintain
• Completely Enclosed
• Needs no Lubrication
  
  

Applications of these Air Pneumatic Vibrators:

• Powder filling Machines
• Food Industry
• Pharmaceutical Industry
• Packing lines sieving
• Vibration Tables

These Pneumatic air vibrators work on a turbine principle and are silent than ball or roller vibrators. These air turbine vibrators are low on maintenance much more efficient and low on air consumption than equivalent models working on ball or roller principle.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Usually ex-stock

Note : operating  pressure 6 kg/cm2

They can be used for promoting material flow from small hoppers, down feed pipes and chutes and as prime over for screen, Feeders, compaction and testing table etc.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: Usually Ex-stock

This Turbine Vibrators has been designed for applications that require small to medium amount of vibration. Ideal applications are for small capacity hoppers (up to 250 Kg capacity*) in powder filling machines, component feeders, vibration tables and small selves.

Note : operating pressure 6 kg/cm2

These Mini Turbine Vibrators have been designed for application that require small to medium amount of vibrations in laboratory equipment, small hoppers, component feeders, Powder filling equipment etc. The exhaust can be piped away if required.

Salient Features:

• Simple Construction

• Muffled Exhaust

• Low Weight

• Variable Frequency

• Dual mount Provision

Additional Information:

• Port of Dispatch: Mumbai
• Delivery Time: Usually ex-stock

We are engaged in providing the best quality Pneumatic Chipping Hammer. Suitable for different activities like chipping of metals, removal core sand and cleaning of billets, this hammer is highly acknowledged among our clients. Chipping hammer provided by is manufactured with the use of premium quality raw material and progressive technology at vendors' end. Quality is the main motto of our company therefore we assure our clients that this hammer is best in quality and durability.

Features:

• Rust proof
• High durability
• Rigid design

Specifications :-

• Length: 570mm
• Cylinder dia.: φ38mm
• Working pressure: 0.5-0.63Mpa
• Impact frequency: 16HZ