Call 08048762771 78% Response Rate

our range

Vortex Coolers

Panel Cooler and Cabinet Enclosure Cooler for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many competitors - all of our coolers are stainless steel, not just the vortex tube, for longer life and flexible use. Frigid-X™ Panel Coolers are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts. Cabinet Enclosure Cooler - Frigid- X™ series are ideal for all NEMA Type 12 (IP 54), NEMA Type 3R(IP 24 ) and Patented* NEMA Type 4-4X (IP 66) rated panels
  • Vortex Panel Cooler
  • Vortex Panel Cooler
  • Vortex Panel Cooler
  • Vortex Panel Cooler
Vortex Panel Cooler

Vortex Panel Cooler

Rs 12,000  / PieceGet Best Price
BrandSan Air
Usage/ApplicationSpot Cooling, Dry Machining Application
MOCAluminium / Stainless Steel
Air Consumption2 - 150 cfm
TemperatureUpto -40 C
Generator MaterialBrass
Generator TypesLow Temperature and for High Cold Air Flow
Vortex Tubes are devices that work on a standard compressed
air supply. Air enters the vortex tube and is literally split into
two parts - cold air at one end, and hot air at the other - all
without any moving parts.
Vortex Tubes have an adjustable valve at the "hot" end which
controls the volume of the air flow, and the temperature
exiting at the cold end. By adjusting the valve, you control the
"cold fraction" which is the percentage of total input
compressed air that exits the cold end of the Vortex Tube. Our
Vortex Tubes may also be supplied with a fixed preset "cold
fraction" instead of an adjustable valve.
Inside is the interchangeable brass "generator" which can
alter the air used in the Vortex Tube, and control the
temperature ranges you wish to have at the cold and hot ends.
There are several ranges of generators for compressed air
capacity. There are also two basic types of generators - one to
produce the extreme cold temperatures (maximum cold
temperature out called the C generator) and one type to
produce the maximum amount of cooling (maximum
refrigeration called the H generator)

View Complete details

get quoterequest a call back
  • Vortex Cooler
  • Vortex Cooler
  • Vortex Cooler
Vortex Cooler

Vortex Cooler

Rs 35,000  / UnitGet Best Price
Usage/ApplicationOil, Power Plant, Industrial
BrandVORTEC
Capacity900-5000 btuh/hr
Cooler MaterialAL / SS
Pressure7 bar
Air consumption15-70 cfm
Cooling TypeThermostat,continuous cooling
Standard Vortex Enclosure Coolers are available NEMA 12, NEMA 4 and NEMA 4X versions, and can be purchased with an electric thermostat or without a thermostat (constant run).  The electrical enclosure cooling thermostat model maintains tight control on the temperature setpoint of +/- 3 deg F. Vortex  electric enclosure cooling systems are available in cooling capacities ranging from 400 BTU/hr to 5000 BTU/hr. 
Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans.   
Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination.  Smaller cabinet sizes make temperature control difficult and prone to premature failures.  Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads.  The result is productivity lost due to machine or line shutdowns. 
Vortex Enclosure Coolers maintain a slight pressurization in the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

BENEFITS
  •  
    • Thermostatically controlled models maintain enclosure temperatures within ideal range
    • Highly reliable, with full 10 year warranty
    • No ambient, dirty or humid air enters the cabinet
    • Can be used on all cabinets, even in tight spaces
    • No wiring required to install most models
    • Operates in environments up to 175 deg F
    • Low cost, compared to Freon air conditioners
    • Thermostatically controlled models reduce operating cost
    • Multiple cooling capacities available, to optimize performance and operating cost
    • Little maintenance required, as compared to Freon A/C and fans
    • Use no refrigerants
FEATURES
  •  
    • Small footprint to fit on all enclosures and in confined areas
    • Electrical thermostat models can be set to desired temperature +/- 3 deg F
    • Supplied with air filter and ducting kit
    • Maintains slight pressurization in the enclosure

View Complete details

get quoterequest a call back
  • Electric Vortex AC
  • Electric Vortex AC
  • Electric Vortex AC
  • Electric Vortex AC
Electric Vortex AC

Electric Vortex AC

Rs 50,000  / UnitGet Best Price
Usage/ApplicationCabinet Cooling for Flameproof environments
BrandVORTEC
Air consumption15-70 cfm
Cooling Capacity900-5000 BTUH
Cooling TypeContinuous,Mechanical And Electrical Thermostat
NEMA RatingUL Listed Type 4/4X

Electric Vortex A/C Enclosure Coolers are the most advanced line of Vortec enclosure coolers and incorporate the most up-to-date features of the Vortex A/C and Vortex Cooler lines. These enclosure coolers are yet another innovative compressed air product in Vortec’s line of highly reliable, cost effective enclosure coolers.

  • Sleek, modern design
  • Noise reduction of 78%, when compared to standard vortex enclosure coolers
  • Energy reduction through its integral electric thermostat
  • Quick and easy installation in less than 10 minutes
  • Flexible installation: top, side or front (door) mount
  • UL Listed Type 4/4X
  • Can be supplied with 40 - 150 psi pressure, compressed air

The Electric Vortex A/C is available in 3 different cooling capacities from 900 to 2,500 BTU/hr*. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

Electric Vortex A/Cs maintain a slight pressurization in the cabinet to keep electrical and electronic components clean and dry; and are thermostatically controlled to maintain enclosure temperatures at a user specified temperature setting.

* All cooling capacities are measured at 100 psi.

BENEFITS
  • Easy to install, takes less than 10 minutes
  • No wiring required to install, comes pre-wired
  • Thermostatically controlled to maintain enclosure temperatures at a user defined temperature
  • Operates effectively at 40 - 150 psi pressure levels, does not require a specific pressure
  • Highly reliable, with full 10 year warranty
  • No ambient, dirty or humid air enters the enclosure
  • Can be used on all enclosures, even in tight spaces
  • Operates in environments up to 175 deg F
  • Reduce operating cost with electric thermostat turning the unit on only when necessary
  • Very quiet, 62-68 dBA operation, 78% quieter than standard vortex coolers
  • Multiple cooling capacities available, to optimize performance and operating cost
  • Little maintenance required, as compared to Freon A/C and fans
  • Use no refrigerants
  • Sleek, modern design
FEATURES

 

  • UL Listed Type 4/4X
  • Small footprint to fit on all enclosures and in confined areas
  • Can be mounted on the top, side, or front (door) of the enclosure
  • Maintain temperatures at a user defined thermostat setting
  • Systems are supplied with air filter and ducting kit
  • Maintains slight pressurization in the enclosure while running
  • 10 year warranty

View Complete details

get quoterequest a call back
HAZLOC Vortex AC

HAZLOC Vortex AC

Rs 50,000  / UnitGet Best Price
BrandVORTEC
Model Name/NumberHazardous Location Duty
Air consumption15-70 cfm
Cooling Capacity900-5000 BTUH
ClassificationUL Classified for Class I Div 2,Groups A,B,C and D,Class II Div 2,Groups F&G and Class III
Cooling TypeMechanical Thermostat,continuous cooling

Hazardous Location (HazLoc) Duty Vortex A/C Coolers are designed specifically for purged* Electrical enclosures in Class I Div 2, Groups A,B,C and D locations, Class II Div 2, Groups F&G and Class III locations. The HazLoc Vortex A/C incorporates the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers.

  • Sleek, modern design
  • Noise reduction of 78%, when compared to other vortex enclosure coolers
  • Energy use reduction through its integral mechanical thermostat
  • Quick and easy installation in about 5 minutes
  • Flexible installation: top, side or front (door) mount
  • Incorporates check valve to prevent loss of enclosure pressure when cooling is not required
  • T4 Temperature Class rating

The HazLoc Vortex A/C is available in 4 different cooling capacities. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

HazLoc Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

* Purge system not included with purchase

BENEFITS
  • Easy to install, takes about 5 minutes
  • No wiring required to install
  • UL Classified for Class I Div 2, Groups A,B,C and D, Class II Div 2, Groups F&G and Class III
  • Thermostatically controlled to maintain enclosure temperatures within ideal range
  • Highly reliable, with full 10 year warranty
  • No ambient, dirty or humid air enters the cabinet
  • Can be used on all cabinets, even in tight spaces
  • Operates in environments up to 175 deg F
  • Significantly lower cost, compared to explosion proof Freon air conditioners
  • Reduce operating cost with mechanical thermostat turning the unit on only when necessary
  • Very quiet, 62 dBA operation, 78% quieter than typical vortex coolers
  • Multiple cooling capacities available, to optimize performance and operating cost
  • Little maintenance required, as compared to Freon A/C and fans
  • Use no refrigerants
  • Sleek, modern design
FEATURES

 

  • 10 year warranty
  • UL Classified
  • Small footprint to fit on all enclosures and in confined areas
  • Top, side or front (door) mount models available
  • Maintain temperature between 80 - 90 deg F
  • Supplied with air filter and ducting kit
  • Maintains slight pressurization in the enclosure
  • UL Listed and UL Classified

View Complete details

get quoterequest a call back
Panel Guard

Panel Guard

Rs 35,000  / UnitGet Best Price
Usage/ApplicationCabinet Cooling for Flameproof environments
BrandVORTEC
Air consumption15-35 cfm
Cooling Capacity900-2500 BTUH
Cooling TypeMechanical Thermostat
ClassificationNEMA 4

Panel Guard Enclosure Coolers enhance the benefits of Vortex coolers for enclosure cooling by adding a mechanical thermostat for optimum temperature control without the need for wiring. Standard Vortex Coolers utilize an electrical thermostat with a solenoid, so installation must include running wiring from the cabinet to the Cooler.

Panel Guard models do not require wiring so installation is quick and easy and the energy use reduction advantages of using a thermostat are maintained. Panel Guard Enclosure Coolers are available in 3 different cooling capacities and are rated for NEMA 4 enclosures.

All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans.

Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

Vortex Enclosure Coolers maintain a slight pressurization in the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

BENEFITS
  • Easy to install in about 5 minutes
  • No wiring required to install
  • Thermostatically controlled to maintain enclosure temperatures within ideal range
  • Highly reliable, with full 10 year warranty
  • No ambient, dirty or humid air enters the cabinet
  • Can be used on all NEMA 4 cabinets, even in tight spaces
  • Operates in environments up to 175 deg F
  • Low cost, compared to Freon air conditioners
  • Thermostatically controlled to reduce operating cost
  • Multiple cooling capacities available, to optimize performance and operating cost
  • Little maintenance required, as compared to Freon A/C and fans
  • Use no refrigerants
FEATURES

 

  • Small footprint to fit on all enclosures and in confined areas
  • Top mount
  • Mechanical thermostat maintain temperature between 75-100deg F 24-
  • Supplied with air filter and ducting kit
  • Maintains slight pressurization in the enclosure

View Complete details

get quoterequest a call back
ProtEX Vortex AC

ProtEX Vortex AC

Rs 50,000  / UnitGet Best Price
Tonnage0.5
BrandVORTEC
Model Name/NumberHazardous Location Duty
RefrigerantNone
Airflow15 - 70 cfm
FeaturesCompressed Air cooling
SizeCompact

ProtEX Vortex A/C Coolers are designed specifically for purged * Electrical enclosures in ATEX Zones 1 and 21, UL Class I, Div. 1 (Groups A,B,C and D), Class II, Div. 1 (Groups F and G), Class III and Temperature Class T3 areas. The ProtEX Vortex A/C incorporates the most up-to-date features into Vortec’s line of highly reliable, cost-effective enclosure coolers.

  • Sleek, modern design
  • Noise reduction of 78%, when compared to other vortex enclosure coolers
  • Energy use reduction through its integral mechanical thermostat
  • Filter contains pressure dop indicator notifying you of needed filter changes
  • Quick and easy installation in about 5 minutes
  • Flexible installation: top, side or front (door) mount
  • Incorporates check valve to prevent loss of enclosure pressure when cooling is not required
  • ATEX Certification Ex II 2 GD 
  • UL Classified Class I Div. 1, Class II Div. 1, Class III
  • Ex h llC T200C Gb
  • Ex h lllC T200°C Db
  • Ta+10 to +80C
  • T3 Temperature Class rating

The ProtEX Vortex A/C is available in 4 different cooling capacities; 900,1500,2500 and 5,000 BTU/hr. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

ProtEX Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

* Purge system not included with purchase

View Complete details

get quoterequest a call back
ATEX Vortex AC

ATEX Vortex AC

Rs 50,000  / UnitGet Best Price
Tonnage0.5
BrandVORTEC
Model Name/NumberVortec ATEX Vortex AC
Airflow15 - 70 cfm
CompressorCompressed Air cooling
SizeCompact

ATEX Vortex A/C Coolers are designed specifically for purged * Electrical enclosures in ATEX Zones 2 and 22 and Temperature Class T4 areas. The ATEX Vortex A/C incorporates the most up-to-date features into Vortec's line of highly reliable, cost effective enclosure coolers.

  • Sleek, modern design
  • Noise reduction of 78%, when compared to other vortex enclosure coolers
  • Energy use reduction through its integral mechanical thermostat
  • Quick and easy installation in about 5 minutes
  • Flexible installation: top, side or front (door) mount
  • Incorporates check valve to prevent loss of enclosure pressure when cooling is not required
  • ATEX Certification Ex II 3 GD T4
  • Tamb -20°C to 80°C (-4°F to 175°F)
  • T4 Temperature Class rating

The ATEX Vortex A/C is available in 4 different cooling capacities from 900 to 5,000 BTU/hr. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

ATEX Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

* Purge system not included with purchase

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES