San Air Tools

• Material of Construction in SS 316
• Maximum flow rate 40 Kgs / Minute
• Max discharge pressure up to 6 Bar
• Generates differential head up to 60 Mtrs for thin bodied liquids
• The flow rate is approximately proportioned to speed
• Pumping pressure does not depend upon the speed
• ROTORS are made of Stainless Steel 316 material
• STATORS are metal tubes with internally moulded synthetic rubber & available in Viton, Hypalon, Hi Nitrile, EPDM,Buna –N.

• 350 Watts / Single Phase FHP Type / TEFC Motor.
• In Built ON- OFF Switch.
• Max Flow Rate : 70 LPM
• Max Head in Feet : 18 Feet.
• Weight : 4 Kgs

• 600 Watts / Single Phase FHP Type / TEFC Motor
• Intermittent Duty Rated. Powder Coated / Aluminium Body
• Three wire cord and plug. In Built ON- OFF Switch
• Suitable For Low Viscous Liquid application
• Max Flow Rate : 90 LPM
• Max Head in Feet : 35 Feet.
• Weight : 4 Kgs
• Mounting : Vertical

• Material of Construction in SS 316 / 304.
• Maximum flow rate 60 Kgs / Minute. Consult Factory.
• Max discharge pressure up to 12 Bar. Consult Factory.
• Generates differential head up to 100 Mtrs for thin bodied liquids.
• The flow rate is approximately proportioned to speed.
• Pumping pressure does not depend upon the speed.
• ROTORS are made of Stainless Steel 316 material.
• STATORS are metal tubes with internally moulded synthetic rubber & available in Viton, Hypalon, Neoprene, EPDM, Buna –N.

• Max head: 10 meters

• Air hose diameter: 8 mm

• Capacity: 80 lpm

• Suction tube length: 1060 mm

• Inlet size: 40 mm

• Outlet size: 25 mm

• Safety valve pressure: 0.03 mpa

• Air pressure: 0.1 mpa

• Pipe of barrel: Stainless steel 304

• Approx weight: 5 kg

• Material of Construction in SS 316.
• Maximum flow rate 40 Kgs / Minute.
• Max discharge pressure up to 8 Bar.
• Generates differential head up to 80 Mtrs for thin bodied liquids.
• The flow rate is approximately proportioned to speed.
• Pumping pressure does not depend upon the speed.
• Rotors are made of Stainless Steel 316 material.
• Stators are metal tubes with internally moulded synthetic rubber & available in Viton, Hypalon, Hi Nitrile, EPDM, Buna –N.

• Capacity : up to 350 M2/Hr
• Length : up to 4 mtrs
• Temperature : up to 160 C
• Speed : up to 3500 RPM
• Pressure : up to 10 Kg/cm2

Non Metallic Drum Pumps are high performance based non metallic drum pumps that are designed to deliver consistent performance support. Featuring presence of high performance drum pump , these can provide dual working of self-priming and self-draining types. We can make these available in polypropylene finish for suiting any drum/container. Further, these feature standard inlet size of 44 mm & outlet size of 20 mm which makes these suitable to be used with 1" flexible hose. Coming with standard tube length of 39", our expertise also lies in offering them in custom finish lengths of up to 60" as demanded by the customers.

Features:

• High performance based non metallic drum pumps that are designed to deliver consistent performance support
• Featuring presence of high performance drum pump for emptying drum to residue of 1 liter
• Can provide dual working of self-priming and self-draining types
• Can be made available in polypropylene finish for suiting any drum/container
• Featuring standard inlet
• Suitable to be used with 1" flexible hose
• Can be offered with standard 
• Expertise in also offering custom finish lengths up to 60" as demanded by the customers

•  Tube length of 39"
•  Size of 44 mm & outlet size of 20 mm
• Emptying drum to residue of 1 liter 

Metallic Drum Pump is high performance based metallic drum pump which is also known as barrel pump. Made available in stainless steel/chrome plated finish design, the precision functioning of drum pump allows efficient emptying of drum to residue of 1 liter. Here, our expertise lies in offering these in self-priming and self-draining options. With these pumps not requiring any welding support in any part of pump tubes, these can be completely stripped down using least tooling support required in the process.

Features:

• High performance based metallic drum pump which are also known as barrel pumps
• Made available in stainless steel/chrome plated finish design
• Precision functioning of drum pump allows efficient emptying of drum to residue of 1 liter
• Can be made available in self-priming and self-draining options
• Do not require any welding support in any part of pump tubes
• Allows for complete strip down using least tooling support required in the process
• Available in SS 316/MS Chrome Plated finish for suiting any drum/container requirements
• Having standard inlet size in 44 mm & outlet size of 20 mm
• Perfectly meeting the use of 1" flexible hose
• Can be made available in standard tube length of 39"
• Also offered in customized finish lengths of up to 60"
• Also offered in flame proof drum pump/barrel pump finish

• 1050 Watts / Single Phase FHP Type / FC Motor
• Intermittent Duty Rated. Plastic Body.
• Three wire cord and plug.
• In Built ON- OFF Switch.
• Max Flow Rate : 110 LPM
• Max Head in Feet : 45 Feet.
• Weight : 2 Kgs
• Mounting : Vertical