Call 08048762771 72% Response Rate

our range

IBC Stirrer

PNEUMATIC CYLINDER (PALLET TYPE LIFT TYPE ) IBC STIRRER PNEUMATIC CYLINDER (PALLET TYPE LIFT TYPE ) IBC STIRRER Applicable to IBC barrels (IBC barrel size: L1210*D1010*H1 150mm), mixing, mixing, reaction, anti-precipitation and other varied occasions. This machine adopts double-cylinder pneumatic lifting, which can be freely adjusted, raised and lowered, and can also be used for conventional long pallets. The lifting height is 1200mm away from the ground, and the IBC barrel can be accurately placed in the frame. San Air Pneumatic Stirrer The blade design can easily pass through the San Air IBC barrel with a diameter of 140mm. After turning, the blade opens to achieve the stirring effect, and the blade closes when stopped.San Air Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.?The maintenance a
Electric Motor - IBC Stirrer Plate Mounted IBC Stirrer

Electric Motor - IBC Stirrer Plate Mounted IBC Stirrer

Rs 10,000  / OnwardsGet Best Price
Power1 HP
BrandSan Air
Speed<2000 RPM
TypeAluminium
MaterialMS / SS
Country of OriginMade in India

he tote tank mixers CRP-E are equipped with a pneumatic drive. It has been especially designed for plastic IBCs with filling openings of at least 150 mm and volumes from 600 l up to 1,200 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive.

The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator.

  • Folding propellers that fit through the filling opening DN 150 mm are used for geared Stirrers.
  • The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly

·         San Air Applicable to IBC barrels (IBC barrel size: L1210*D1010*H1150mm), dissolved, mixed, reacted. A variety of mixing occasions such as anti-sedimentation.

Cross the frame on the ibc bucket, lock the screws on both sides, and turn on the  San air supply to stir. Affordable, safe and convenient.

The umbrella-designed blade can easily pass through the IBC diameter 140mm barrel mouth. After turning, the blade opens to achieve the stirring effect, and the blade closes when stopped

·          San Air  Plate Maunted Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.

·         San Air Plate Maounted Ibc Stirrer are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.

 

View Complete details

get quoterequest a call back
Electric Motor- IBC Mixer Cap Mount

Electric Motor- IBC Mixer Cap Mount

Rs 10,000  / OnwardsGet Best Price
Power0-5-5 HP
BrandSAN AIR
Speed50-3000 RPM
TypeAluminium
PhaseThree Phase,Air Operated,Single Phase
MaterialMS / SS
Country of OriginMade in India

San Air Applicable to IBC barrels (IBC barrel size: L1210*D1010*H1150mm), dissolved, mixed, reacted. A variety of mixing occasions such as anti-sedimentation.

Cross the frame on the ibc bucket, lock the screws on both sides, and turn on the  San air supply to stir. Affordable, safe and convenient.

The umbrella-designed blade can easily pass through the IBC diameter 140mm barrel mouth. After turning, the blade opens to achieve the stirring effect, and the blade closes when stopped

 San Air Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.

1. Pneumatic mixer can be steplessly regulated.

2. Pneumatic mixer can reverse in the forward direction.

3. The working environment of pneumatic mixer is not affected by vibration, high temperature, electromagnetic, radiation, etc.

4. Pneumatic motor matched with pneumatic mixer has overload protection function and will not malfunction due to overload.

5. Pneumatic mixer has a high starting torque and can be started directly with load. Start and stop are fast, and can be started with load. It will not affect the use of overloaded burning machines like electric mixers.

6. Pneumatic mixer is easy to operate and maintain.

Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.

View Complete details

get quoterequest a call back
  • Pneumatic  Motor - IBC Stirrer Plate Mounted IBC Stirrer
  • Pneumatic  Motor - IBC Stirrer Plate Mounted IBC Stirrer
Pneumatic  Motor - IBC Stirrer Plate Mounted IBC Stirrer

Pneumatic Motor - IBC Stirrer Plate Mounted IBC Stirrer

Rs 10,000  / OnwardsGet Best Price
Model TypeSan Air-IBC STIRRER PLATE MOUNTED IBC STIRRER
SizeUpto 200 liter Drums
MaterialSS 316 / 304
BrandSan Air
Finishing TypeSS buffed
Motor Power0.5 to 1.5 hp
Country of OriginMade in India

San Air he tote tank mixers CRP-E are equipped with a pneumatic Plate Mounted IBC Stirrer drive. It has been especially designed for plastic IBCs with filling openings of at least 150 mm and volumes from 600 l up to 1,200 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive.

The Pneumatic   Plate Mounted  IBC mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator.

  • Folding propellers that fit through the filling opening DN 150 mm are used for geared Stirrers.
  • The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly

·         San Air Applicable to IBC barrels (IBC barrel size: L1210*D1010*H1150mm), dissolved, mixed, reacted. A variety of mixing occasions such as anti-sedimentation.

Cross the frame on the ibc bucket, lock the screws on both sides, and turn on the  San air supply to stir. Affordable, safe and convenient.

The umbrella-designed blade can easily pass through the IBC diameter 140mm barrel mouth. After turning, the blade opens to achieve the stirring effect, and the blade closes when stopped

·          San Air  Plate Maunted Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.

 

View Complete details

get quoterequest a call back
Pneumatic Motor-IBC Stirrer IBC Cap Mounted

Pneumatic Motor-IBC Stirrer IBC Cap Mounted

Rs 10,000  / OnwardsGet Best Price
Model TypeSan Air-PNEUMATIC MOTOR-IBC STIRRER IBC CAP MOUNTED
SizeUpto 200 liter Drums
MaterialSS 316 / 304
BrandSan Air
Finishing TypeSS buffed
Motor Power0.5 to 1.5 hp
Country of OriginMade in India

San Air Applicable to IBC barrels (IBC barrel size: L1210*D1010*H1150mm), dissolved, mixed, reacted. A variety of mixing occasions such as anti-sedimentation.

Cross the frame on the ibc bucket, lock the screws on both sides, and turn on the  San air supply to stir. Affordable, safe and convenient.

The umbrella-designed blade can easily pass through the IBC diameter 140mm barrel mouth. After turning, the blade opens to achieve the stirring effect, and the blade closes when stopped

 San Air Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.

1. Pneumatic mixer can be steplessly regulated.

2. Pneumatic mixer can reverse in the forward direction.

3. The working environment of pneumatic mixer is not affected by vibration, high temperature, electromagnetic, radiation, etc.

4. Pneumatic motor matched with pneumatic mixer has overload protection function and will not malfunction due to overload.

5. Pneumatic mixer has a high starting torque and can be started directly with load. Start and stop are fast, and can be started with load. It will not affect the use of overloaded burning machines like electric mixers.

6. Pneumatic mixer is easy to operate and maintain.

 

 

 

View Complete details

get quoterequest a call back
Electric Motor -IBC Mixer  Pneumatic Cylinder (Pallet  Type Lift  Type  )  IBC Stirrer

Electric Motor -IBC Mixer Pneumatic Cylinder (Pallet Type Lift Type ) IBC Stirrer

Rs 10,000  / OnwardsGet Best Price
Automation GradeSemi-Automatic
DesignDigital
BrandSan Air
Model Name/NumberSan Air - PNEUMATIC CYLINDER (PALLET TYPE LIFT TYPE ) IBC STIRRER
MaterialMS/SS
Country of OriginMade in India

Name: PNEUMATIC CYLINDER (PALLET TYPE LIFT TYPE )  IBC STIRRER

 PNEUMATIC CYLINDER (PALLET TYPE LIFT TYPE )  IBC STIRRER Applicable to IBC barrels (IBC barrel size: L1210*D1010*H1 150mm), mixing, mixing, reaction, anti-precipitation and other varied occasions.

This machine adopts double-cylinder pneumatic lifting, which can be freely adjusted, raised and lowered, and can also be used for conventional long pallets.

The lifting height is 1200mm away from the ground, and the IBC barrel can be accurately placed in the frame.

 San Air Pneumatic Stirrer The blade design can easily pass through the San Air  IBC barrel with a diameter of 140mm. After turning, the blade opens to achieve the stirring effect, and the blade closes when stopped.

 San Air Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, paint, paint, woodworking, food, daily chemical and other inflammable, explosive, dust, heavy load, wet and other workplaces.?

The maintenance and inspection of the mixer has a great influence on the service life and performance. In order to fully exert the performance, clean and dry compressed air must be used. The rust and moisture in the piping in the air compressor must be filtered and removed before use. Install filters or better triplets. Please use it under the air pressure range of 5-8kg/cm2. If the high pressure exceeds this pressure range, it will cause malfunction. If the pressure is insufficient, the performance will not be able to be exerted. In order to maintain stable performance, it must be supplied pneumatically. Tool oil, insufficient oil supply will cause the tool to heat up, causing wear, insufficient power, performance degradation, etc., greatly affecting tool life.

 

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES